Descripton : | Elumatec VS704THV four head welder, with digital positional transom stops, as it is a upgraded model to the previous one. According to information obtained from the Elumatec datasheet the machine has the following capabilities:
- Four T-heads
- All welding heads can be pivoted 90° inwards in pairs for H-welding
- Heater plate sizes: width 229mm, height 270mm
- Four T-heater plates
- 135mm max. profile width at 90°
- Max. profile height 210mm
- Min. profile height 40mm
- Min. profile height with special back fence 20mm
- Max. profile length 4,525mm (special length optional)
- Smallest frame size 305mm
- Weld seam restriction 0.2-2.0mm
- Power supply 230/400V, 3~, 50/60Hz
- Compressed air supply 6-8 bar
- Air consumption per welding cycle 240l
- Weld seam temperature control 0°-70°C
- Heater plate temperature control 0°-300°C
- Welding burn-off 5mm
- Welding time setting range in sec. starting from 0
- Cooling time setting range in sec. starting from 0
- Power output 11.5kW
- Length 5,150mm, width 815mm, height 2,240mm
- Weight 2,035kg.
Photos available upon request.
|