Description : | We have in stock an Elumatec DG 104 double mitre saw, one of the finest saws for the market. Ours comes with the E355 positioner controller. According to the Elumatec website* the machine has the following specifications:
- The optimum double mitre saw for the series production as well as for special applications
- The universal pivoting and tilting of both saw heads allows cutting of high and wide profiles, as well as all kind of compound mitres. Many of the profiles can be cut without support blocks
- Cutting of point to point dimension of all variants. Therefore no complicated length calculation is necessary. This is a big advantage when cutting special angles
- Pivoting range with digital angle display
- Safety hoods
- Standard equipped with saw blades
- Standard equipped with digital display E 111
- Pulsed coolant system
Technical information:
- Minimum cutting length 90° 335 mm
- Minimum cutting length 45° tilted 335 mm
- Pivoting range inwards 90°- 45° (up to 22,5° manual with digital display)
- Tilting range inwards pneumatic 90°- 45°
- Cutting capacity see cutting diagram
- Saw blade diameter 420 mm
- Spindle speed 2.800 r.p.m.
- Power supply 230 / 400 V, 3~, 50 Hz
- Power output each motor 4 kW
- Compressed air supply 7 bar
- Air consumption per working 40 l without mist spray, 64 l with mist spray
Please note we cannot be held responsible for any inaccuracies. *Source: http://www.elumatec.com/products/ |